![]() |
|
Spaces home 91DD018PhotosProfileFriends | ![]() |
|
April 19 I must be getting Old....I don't normally get too political but several things have ruffled my feathers recently.
Below is a quote from the Sydney Morning Herald...
"
A POWERFUL Indonesian parliamentary commission is set to recommend that Indonesia's ambassador not return to Canberra until Australia apologises for the Papuan visa crisis. In response to John Howard's refusal yesterday to say sorry over the affair, a member of the foreign affairs and defence commission, Djoko Susilo, accused Australia of trying to "hurt the feelings of the Indonesian Government and the Indonesian people". "
Hurt the feelings of the Indonesian people! What about the cartoon of the Aussi Prime Minister depicted as a dingo mounting his Foreign minister?? It just doesn't come any worse here than to portray people as dogs...That was really demeaning! Come on Aussis.....Just tell them to Fuuuuck Ooorrff! I still remember when a planeload of Aussi tourists were turned around at Bali and sent home because they did not have visas. The fact in those days that Aussi tourists did not need visas for stays up to 60 days was forgotton for a day. Once again the tail wags the dog.
"Mr Susilo said the commission would urge the ambassador, Hamzah Thayeb, who was recalled to Indonesia three weeks ago, not to return "any time soon, until we get a satisfactory explanation from John Howard's Government or until after a formal apology for what happened".
Let the ambasador stay in Indonesia. If he worth his salt he will tell the commission to grow up and get on with something worthwhile like bringing the bankers who caused the Indonesian monetary collapse to justice.
And as if to add to the current woes of no DX (Except Australia which doesn't count as DX) Playboy magazine moved in to the 4th floor of the building we occupy. I have a feeling more stones are going to hit us than Playboy!! The riot for hire FPI wanker bastards demanded Rupiah 1 billion to go away. Well they hadn't arrived at that stage because they couldn't find the office. The local Jakarta youth group (Also Muslims) were contacted and arrived en mass to defend the area from the FPI In loose terms FPI means Forum for the Protection of Islam. In reality it is a group of thugs who are paid to go out and protest/attack and terrify whatever and whoever their paymasters decide...all under the guise of protecting Islamic values. They also run a protection racket for businesses which are deemed to be offensive to the Islamic values they serve to protect. Three truck loads of protectors of the faith attacked a restaurant/nightclub in Kemang a few years ago and while terrorizing patrons and trashing the joint removed wallets and valuables from the patrons. The owner of the building confesed he had refused to pay the protection. Personally I hope the police shoot the pricks and jail the ringleaders. I guess playboy must have paid the money because the police and TV crew have gone and no body seems interested in our office anymore....There are two massage palours and a duty free liquor outlet in the complex....the FPI could have a field day protecting the morality of the masses....maybe thats where they all ended up! I don't usually feel like this....I must be getting old.... April 03 Dinasaur RadiosDinasaurus Radios
I was thinking the other day about how far computers had come in the past 10 years and then hand phones from 20lb bricks you would have to clear a space on the floor for to nowadays when my windows based PDA phone is about the size of two match boxes and then I looked at my radio collection. There is stuff all difference between the radios of 20 years ago and those on the market today. Sure they advertise more power, (there was 400w valve rigs 20 years ago too) DSP, (Can you really hear anything a well tuned Collins won’t?) and TV screens that won’t pick up much but there has been very few groundbreaking improvements in amateur radios. It is a box with a few knobs and dials that we talk around the world with using a microphone or tap out morse code on a key by hand.
By comparison on our computers and phones we can tap out the text on a keyboard and send it along with a picture, video clip or whatever. I am talking SMS or MMS or instant messaging. I believe that you can buy several after market products that you can add to your basic radio and computer, that after considerable study, effortand trial and error may be able to send and receive faxes, emails, slow scan TV and even small pictures with some HF radios. Why isn’t this already in one black box? They can put it all into a tiny telephone and sell it for peanuts so all that would be needed for HF is more power and a good antenna. Bandwidth problems? Hardly, the Ham bands are empty most of the time and bandwidth is solved by compression and digitalization techniques and just look at where Skype is at these days and the latest MSN messenger. As far as commercial stuff goes voice communications are a pain in the butt. I would much rather prepare a page or two of text and have that sent and 100% received than try to explain technical stuff with a non native speaker about how things work! Send a document and he can pull up babel fish on his radio/computer at his end and read it in his language. This is where HF radios should be today. Let the computers handle the hard stuff. The technology is definitely out there but ICOM/Yaesu/Kenwood and the rest just don’t want to risk it. I think the market is saturated with radios. There is hardly anything to set them apart. The laboratories can tell that this one is better or worse with their delicate instruments but can our ears? I don’t think so. I want a new radio and this is what I want!
It has to be incorporated into or based on a fully functional computer. I want to lift the top up and look at a screen just like I do with my laptop. And no crummy 7” TFT’s I want the whole top to be screen plus a monitor plug if I want to watch it remotely or on a really big screen. I want USB ports so I can plug in keyboard/mouse/printer etc at least 6 of them. For marine use an input for a gps signal so it will always transmit present location with every transmission or as programmed. The computer will take care of everything, The DSP on transmit, receive and audio tailoring at everystage. Already we have software defined radios coming on to the market so hopefully it won’t be too much longer. See the following links for where they are at…
One thing the radio will incorporate is an automatic decoder for every kind of digital mode (even morse code) currently available and the ability to update it as new ones come along. The TNC and software will be built in from the ground up. If the radio is the size of an Icom 756 then that’s plenty of room and a pretty good screen size. Should be able to get all the radio controls and settings up on half the screen and the rest taken over for the data decoding, but that can be altered as one wants. So can the colour scheme..just like windows. The radio can retain the normal knobs as required but there should be a removeable cover over them so they don’t distract us and get in the way. Nothing on the cover except input and output plugs…Mics, keyboards, mouse, video and sound, ext speaker and what else? And more than one of each! Speakers…The speakers on my laptop computer sound great. Put a couple of decent speakers recessed in the each side of the radio so they can be swung out and faced forwards. DSP audio and all that good stuff. Voice transmissions can be normal analog or digitized if the distant station can also decode them. Look at where these AOR people are going…Gotta have this stuff built in.. Built in tuner is a must…. And how about this in case you are worried about your antenna…How about a built in antenna analyzer have to use all that processing power for something..Check out the TZ-900 AntennSmith TM Antenna Impedance Analyzer here.. Power. I think the one thing that should be mounted away from the radio is the final RF stage. Make this one of the variables. It doesn’t have to be part of or built in to the radio.. I think it should be mounted on the antenna along with the tuner unit. And while we are on antennas the package should include one of these: But for secret squirrel band hopping stuff you will need a log periodic….. Time to go to work and start saving up!
Have a good day.
March 27 CB Radio shoot outSo far as far as TX audio local quality goes....
Lincoln
AR3500
Magnum 257
George
SA 280
S-9
Cobra
Rx to my ears only
AR3500
SA 280
S-9
Lincoln
magnum 257
george
Cobra
SA 280 could rise up a bit with a tune up and backing off the ALC when I find which pot it is.
Cobra just aint worth a shit but I keep it on hand to let every one to steer clear of it!
One day there may be an easy fix for the audio but still have to fix the -/+5khz and a frequency display that gets out of whack when the clarifier is moved more than one or two khz.
FT817 hooked into a KL200 was also up the top in TX and Rx but has the additional SSB filters installed so hardly fair. Need to get some more CB's to test...
AR3500 still sits on the top of the pile ..a position it has held for the past 20 years and not much around to knock it off it's spot. S-9 once more and more DXWell the Astatic mic doesn't quite cure the S-9 cheap audio comments when signals are strong. Still adds depth to the standard mic though.
At S-9 plus 10db it still leaves a lot to be desired. Not that it is unintelligible but lacks the depth of the other radios. But..point it at europe and south america when conditions are weak with the standard el cheapo 1 dollar mic and she will talk over the "nice audios" every time. Never had a far away DX station tell me the audio from the S-9 sounded "cheap" like a Fremantle station did the other day!
Heaps of Aussi skip rolling into 91 div these days and especially good signals out of the west. Somedays WA can stay in all afternoon. Spoke to a station in the country running 2.4kw. Now that pricked my ears up! What sort of amp could that be. A Zetagi B1200 came the reply. No offense but the audio didn't sound too good but I couldn't copy him at all without the amp so still don't know if it was the amp or the radio. I suspect the amp cos my info is that the B1200 is a class C amp which will sound whiskery on sideband. With 8 ea MRF 422 transisters and a 422 driver I fail to see how it can put out more than 800watts. There is only so much a 422 can do! But those amps are being sold as 2kw amps over on the east coast for A$835.00 so best go get one. After all nobody has any idea how much you are putting out so get the bragging rites and join the 2kw club. Pity about the audio but as long as you can be heard who cares...right?
Why is it the Canary Islands can always get out when the rest of Europe is quiet? If you intend to do a European DX trip start with the canaries...You won't go far wrong DX wize and at least the weather is nice. March 20 S-9 revisitedGot in some Astatic 636L hand mics the other week and tried one on the S-9.
What a difference. Have yet to hear it for myself but it irons out the trebly sharp audio of the standard mic and replaces it with super smooth big rig audio....hard to believe but even Geoff down there in Darwin couldn't fault it so I am on to a good thing here....now just got to find a cheap source of 636L's.
Good thing about the S-9 is that we can still leave the original mic in place for when we want to bust into a pile up somewhere....not that there are too many of them around these days but we have been getting steady conditions down into West Aus and Queensland so catching up with a few old mates at last. February 13 A second class PirateA mate from down under told me off the other day....He heard me calling the boat on an outback 4wd frequency.
I didn't hear them too good but my call co-incided with the VS737 sched time. Naughty me. He said.."I thought you were a First Class pirate!" Dave. Never really thought about it like that but I guess I am now Pirate: 2nd (or worse) Class. I think it might be time to classify radio pirates.
First Class Pirate. Works all Bands, split frequency and mode and only gets heard by the pirate he is talking to. Never uses his real name on the air, Doesn't use his Ham radio while pirating and has several voice muffling mics to switch between.
Second Class Pirate. Pirates everywhere except the Ham bands. Uses his Ham radio. Occaisionally slips up and drops his ham or CB call sign into the conversation. Has trouble working out how his radio works so noted for sticking to one or two frequencies.
Third Class Pirate Scared shitless of getting caught he only operates late at night or mobile so seldom makes any contacts. Will pirate on any band he can find someone to talk to. Usually has had his equipment confiscated more than once. An expert in long wires and ruining radios. Seldom remains in one place for very long before getting hounded out of town.
Fourth Class Pirate This category is reserved for 27mhz freebanders. Frequently the most technically savy of the lot they spend a lot of time building equipment for and monitoring 27.555 USB and making choice long range contacts with 15w on 11m when 10m is officially closed. The most populous of the Pirate fraternity this class is being actively pursued by the amateur radio societies by reducing entry level qualifications to the Ham bands so the authorities can then tax them for talking over the airwaves.
Jokes aside..hope others can add some more attributes to the various pirate classes......
Anyway more serious stuff...
27mhz is pretty rotten these days and cluster stats are confirming the lack of propagation on our beloved 11m so what to do....
Indonesia realised this problem a few years ago and designated a frequency of 11.415 USB over to CB operators to use for communicating between the far flung parts of Indonesia. Designed more for important and emergency communications it has grown rapidly into a subset of the old CB crowd. Frequencies in use now cover 11.405 through 11.450 in 5/kc steps. 11.415 is still the only official designated frequency. There is no structure and all conversations are in Indonesian but most will switch to english if they hear an English speaking voice. With just a dipole and 100w it is possible to communicate through South East Asia most of the time with strong signals and only breaker stations as interference. Henry in Holland was listening to them the other afternoon and was so impressed he went out and flung up a dipole and worked me in Java with a 5/5 out of Holland with 100 watts. Marco in Italy was also copying us on his 4.5mhz dipole 5/9. Better signals into europe than what I was hearing around 13970 on the same night.
11m...11mhz way to go. Cut the wires about 6.25m per leg and a tad shorter if you can't get it up very high and join in the fun on 11mhz! IC 7000Had a bit more time to play around with the 7k and do a bit of research on the mic the oft reported audio problems in the mid and narrow Transmit Band Width (TBW) settings. . Needless to say as long as you leave the TBW in wide you won't experience any problems...just nice clear audio. Bob Heil of Heil Sound fame has got into the act and has a fine article on his web site outlining the problem and suggested fix. It concerns a little mic at the bottom of a tube and an offset hole for the audio to get through. More like a placement thing but he did say there seemed to be a problem in the audio amplifier on certain frequencies which didn't help.
I had already set the TBW as follows: wide 100-2900, mid 200-2900, narrow 300-2800 which was OK with the standard mic and fine with the Heil HC-5 and HC-4. I was getting better reports with the HC-4 but had to crank up the compression and mic gain more than with the HC-5 and std hand mics.
The RIT was given me heck as I didn't seem to be able to find it when needed. Now I have it on all the time but I have lost the ability to change between the memory banks without some knob pushing and praying but that is less of a problem as each bank holds 100 memories. The outside knob is now the clarifier unless I am fiddling around with the RX bandwidths which I am slowing starting not to do...novelty wearing off and seldom helps on SSB ...easier to use the 3 preset bandwidth filters of 3.0, 2.4 and 1.8. audio through the headphones a lot better than bult in speaker for sure.
Thought I would sell it but now I am starting to like it.....
Anyway..here is what Bob has to say.....Loks like the photos did not come accross. www.heilsound.com
January 29 IC 7000The Mod!
3 diodes removed later we are up and running on gen coverage TX/RX but still not sure of the TV.
Lots to learn and remember to get the best out of this baby radio. We will check it out over the next few days.
George ReceiveWas doing a few checks with the George last night to see why it didn't want to drive the linears very well. I thought I must have tweaked the ALC up and it was overdriving and causing probs but the meter showed the George was only putting out 15W! Time to try the other way..can always turn down the mic gain...Cranked her up to 30W on a fooooouuuuurrrr and a tad more on a whistle. Checked it out with a local station who said it sounded good. He was interested in buying a new radio and asked what else I had. I informed him we still had a few Magnum 257's and S-9's and switched to the 257. He reported the 257 had deeper and stronger audio and could he buy one! Some others came on and demanded to hear the S-9 and that was when I realized the received audio was much better than the george. The George rx audio has a bit of the ranger 29xx series white noise about it. Not as bad but noticeable when compared to the S-9. There is a transistor in the rx chain that can be changed out for a lo noise version and this may solve the problem. I may try it. Oddly enough take away the extra memories, the echo, the 5kc step and roger beep and you wonder if it is worth $150 more than the 257.
However with the increase in the ALC it now drives the DX500 to over 400W PEP on SSB so at least we have sorted that out. January 27 Cheaper President radiosI have made enquiries to a European retailer and I think he can ship the Pres George into NZ for NZ$540 or so in single shipments. You will have to take your chances with the customs.... President George and Jackson
Dave’s Notes…. Not my work but I agree pretty much with all said above. Both George and Jackson need to have the RF gain turned back in the presence of strong sign als or close interference. I don’t know if this is due to the selectivity being a bit broad but my take is that the sensitivity is too high. Problem goes away when RX gain is reduced. For some reason this radio does not like to be hooked up to a linear on SSB. I think it may be due to the cable length or something mundane but I will look into this in more depth. After 100W the radio starts shutting down so I guess it doesn’t like RF. Will separate things a bit more and put a tuner before the amp and see what gives. Jackson also suffers similarly and so does the Lincoln but to a lesser extent. None of them seem happy driving a solid state linear. Tried DX500 and KL500 and the KL500 was slightly better. All George could do was rattle the relays of the DX500. Magnum 257 and S-9 drove the kl500 into overload and the DX500 to 450 W PEP +. Yankee toys for Yankee boys…. Great audio out of the George….sharp and strong and it is a class act with the 16 memories and 5k/c shift. Receive audio a wee bit on the sharp and noisy side but have not had time to really fine tune things. Mine arrived without the 560 ohm resistor in place so I had to remove the front panel and solder it in…No biggie but would have preferred President to have included it. The program mod and the memories have remained intact with the power disconnected which is a good thing. Pushing and holding the button combinations every time you want to use the radio would be a chore indeed. George will easily crank out 40W plus but sources in Europe advised keeping it to 25W or the receive RF gain goes funny. He said he couldn’t explain it properly in English so we let it go at that. I have the FM cranked up to 45W and AM 15W Carrier. Heat sink has yet to feel warm so I may tweak some more out on SSB and see what happens. All internal pots are clearly marked with their function which is a nice touch. There are not too many components to get in the way. They are all surface mounted on the back side of the board. Internally George is is a nicely laid out radio with lots of shielding around the PA section.
George PA Section…well shielded but still sensitive to RF…
George underside of Board…here’s where all the parts went!
President Jackson
Jackson..nice and simple with a big 70W SD1405 final on a daughter board. This is a real bread and butter radio…6 bands of 40ch with a 10k/c switch and 5/kc slide on the clarifier. Course clarifier works on TX and RX while fine clarifier tunes RX. Ready to go straight out of the box with no mods needed. Just like in the old days! Jackson is pretty punchy and let down a bit by a muffly microphone. Reports picked up when I used the mic from f the George and better again using the mic from the Magnum 257 which plugged straight in…Have to watch the mic gain and the rx gain or distorted tx and rx will result. Very sensitive. In fact too sensitive…I keep the RF gain at about 50% to prevent strong stations sounding “bubbly”. Has a modulation meter which wasn’t calibrated and a roger beep which I didn’t use to round things off. I didn’t know how much I relied on the counter of the S-9 and displays of the 257, Lincoln and George until I had to go “down 5” and got rather lost till I could zero beat on the other signal…You have to remember where you are on the channel readout only radios!
Looks familiar doesn’t it? Dunno what the black box does. Big speaker.
Note the single PA transistor on the daughter board
The Lincoln has been hammered to death so I won’t do anything on that one….
So What are these going to cost? Unfortunately too much. We have to buy direct from President in France at their Euro prices and shipping. And they are charging a bunch just to get a carton (6) into Singapore. No discounts for volume here. If there is interest in these radios I will bite the bullet and bring them in ….otherwise….they are readily available from European suppliers
President George shipped to NZ Address by Courier……..NZ$680.00 (ouch!) President Jackson Shipped to NZ Address by Courier……NZ$570.00 (*&#@!)
The George might be worth it but the Jackson isn’t. Compared to the price we can offer on the magnums these don’t come close………The S-9 and 257 have these beat , especially for coverage and their willingness to work with an amplifier! Coverage George will cover 26.065mhz thru 28.755mhz in 5k/c or 10k/c steps. Won’t work off the Zeros and fives. Eg 27.547mhz.is a no no. Jackson covers 25.615mhz thru 28.305mhz continuously using the course clarifier.
December 09 Cobra 200 Advertising DeceiptfulCobra claim in their advertising that the Cobra 200 has a 6 digit frequency counter.
Quoted Specs:
30W AM/FM, 100W SSB, Dual finals, SWR Calibration System, Antenna 'Warning Indicator, Night Watch Illumination, 6 Digit Frequency Counter, Echo Control, Roger Beep, Dual Power, +10 kHz Control, Large Full Function Analog Meter,
It doesn't have a counter. It is not reading frequency. It is just a display like the 257, lincoln etc etc. Move the clarifer and the display system goes to shit. It is all over the place and nowhere on frequency. If you want to work the zeros 27540.0 for example for get this radio. It is 1.5 k/c out.
If you are walking down a lane late at night and there is a snake in front of you and a cobra 200 GTL DX behind you. You have one bullet in your gun.
Make sure you shoot the Cobra 200....... Update to the sad sorry Cobra 200 GTL DX sagaWhen you have outlayed good cash on a radio that looks as though it should be a winner it is hard to sit back and accept that it doesn't work. Most of the folks that own this radio will try to accept it's shortcomings and concentrate on the positve aspects of the radio. I could only find one positve aspect. It had 100W for a price range where most radios had 20W. Therefore you could be heard by more people who could ask you what you had done to the radio and please adjust the audio or remove the rubber band that was obviously squeezing a most sensitve part of the male anatomy.
So with grim determination I prepared to apply the patch! A 50.V 1uf cap was found, the traces cleaned back to copper, Tested first ....OK and the cap was attached to the traces as directed.
And that was the last of the cobra!
It keys but no Audio out in any mode.
Its probably a good thing.......
Contacted Cobra and a trip to the US for repair is the only solution.
From here that is about US$75 each way.
For a dog that would chase a mac truck if it got off the leash that is just too much!
Way to much for this Puppy.
But in defence of Cobra they did send me a schematic, alighnment proceedure and parts placement diagram.
Credit where credit is due.....
So back to the drawing board and it seems I had shorted out the tracks instead of sloldering a capacitor in its place! Well we got that sorted out and tried the radio for a while and it seemed it was going along as it was before...rubber band stuff...
Ok remod...This time I got it right. No change in Audio but a big improvement in av talk power. Far out. Can piss off a whole lot more people with it!
Come on Glen ... more mods!
December 03 Cobra 200 GTL DXCOBRA 200 GTL DX
Back Ground This is the new Cobra 200 GTL DX, the SSB/AM/FM hi power Cobra recently released in the USA. It did not take long for it to become the radio that “everybody loves to hate”! I couldn’t see why. If you looked at the price then looked at the specifications, no other radio comes close…30W on AM/FM/CW and 100W on SSB, Antenna warning light, SWR meter, 6 digit counter, echo, roger beep, Hi /Low power switch, NB/ANL, and coverage (Once modified) from 26.065 thru 29.695. The cheapest 100W 10m/11m SSB on the market is running around US$380.00 on up. Why did cobra price this one at US$229.00? On spec alone it should sell for US$350 minimum if they were trying to break into the market. Seems a bit more at stake here. Cobra is making a statement and we must all be wondering just how much we are being ripped off on SSB CB radios today? Obviously Cobra must be making money…they did not release it at this price to go broke! Unfortunately user reports on this radio have not been all good. The audio on SSB seems to be the problem. Regardless I had to have a look and see what Cobra was up to releasing a new 10m radio at the low point in the sun cycle. Doesn’t get much worse on 10m! Why didn’t they make a 40m 100W mobile for a couple of hundred dollars for the car…Now that would probably sell well at the moment!
Out of the Box After waiting over a month for Fedex to clear a couple of these Cobras and a President Lincoln out of customs I eventually loaded up the wallet and drove out to the airport warehouses to do it myself. 3 hours later and a little bit lighter in the wallet I was speeding back to the house with the three radios. One of the cobras had been opened by customs so I opened that one first. First impressions. The box is impressive. Well constructed and excellent artwork. Designed to catch the eye. The box and the radio say they are constructed in the Philippines. I believe Cobra has a factory just out of Manila somewhere. This is a heavy radio. Finish is good and the heat sink from the back running down and underneath looks both effective and attractive. Heavy duty. First thing I did was pull the lids off. Had to see what it looked like inside! The serial number on this was H506000270. No date.
As you can see the 100W PA stage is mounted on the main motherboard. Output transistors on this radio were the HF-50. I heard the new ones coming out had the 2290 finals and had specifically requested this but ….I wonder about the wisdom of placing the 100W PA stage on the main board. All amateur radios keep the PA stage well separated from the rest of the radio. Never seen inside a hi power Galaxy or ranger so I wonder if they do the same? Seems a huge potential for RF into the rest of the circuitry and all those resultant problems. But if Ranger and Galaxy can work it out then so can Cobra.
The boards look neat and lots of tiny components that I could hardly see with my eyes. The speaker is huge also. The insert in the microphone looks like something out of an old telephone!
The heat sink wraps around the radio and protrudes about 2cm under the cabinet.
The speaker is really that big!
The microphone is huge and I was forever bumping my lips with it.
Front Panel
The Front Panel is relatively uncluttered and everything seems easy enough. So just what is everybody on about!
First things first…We had better convert this puppy so we can get it up and running on 11m and show it off to all my mates. OK no worries ..cut R138 and bridge the pad in front of it. Specs on and go searching….There are no component markings on the board and most of the surface mount stuff is microscopic. Black dots on the green circuit board! On to the net and email Dave in the states who has modded his. Help, Urgent, Do you have a photo. Impossible to do this without a guide! A couple of hours later and the pic arrived….Had to study it for a bit…This one was not quite the same..close enough tho.
My one looked like the one above. Went ahead and pulled out the side cutters and destroyed the resistor and dropped a blob of solder across the 2 points above it. A quick check and 26mhz on the counter. Lids on and hooked up to the dummy load to run some quick tests.
Frequency coverage. (Expansion mod done) There are 4 bands A,B,C&D. Each band covers 90 channels. All in order including the alpha channels which read out correctly on the counter and are marked with a dot after them on the channel readout. We have 27085.0 on the counter and CH 11 on the channel readout. We have 27095.0 on the counter and CH 11. on the channel readout Sure looks like a CB set to me!
Band Frequency Talk Whistle A 26.0650 - 26.9550 65W PEP 100W PEP B 26.9650 – 27.8550 80W PEP 120W PEP C 27.8650 – 28.7550 100W PEP 140WPEP D 28.7650 – 29.6950 85W PEP 135W PEP
The -10kc switch does not appear to do anything.
ON AIR TESTS
First thing I found with this radio was that you can’t just put it down anywhere. The heat sink sticking out below the case means you have to prop up the front. Because this is a heavy radio the heat sink will mark what ever you sit it on if you leave it for long. I went back to the box and fitted the mobile bracket to it so it would sit up. Leans back on the heat sink but not too much.. The clarifier is in the wrong place for me. It is the third of 4 knobs and I always seem to go for the last knob which is the SWR Calibrate and echo. Received audio sounded tiny. With such a huge speaker they must have gone to a lot of effort to make it sound so sharp. Everybody reports the transmit audio is too trebly. Clear but sharp. Just needs to get deeper somehow. If nobody has heard you on the radio before they may not comment, but as all my testers confirmed it was not me and they did not like it. Need to try some other microphones and the mod listed below. Cobra have released a fix for the 200 which involves adding a capacitor somewhere, but without a circuit diagram and a photo it would be impossible as none of the components on |